The Laser Shield Wireless Detection Unit is compatible with all Laser Shield Starter Kits which may have been purchased here or at your favorite retailer (i.e. WalMart.com, Circuit City, Costco.com, CompUSA) who generally do not stock add ons such as the Laser Shield Wireless Detection Unit, Keychain Remotes, Laser Shield Cyclone, or Laser Shield Sparrow.

Wireless Communication
The Wireless Detection Units' use a wireless Radio Frequency (RF) to communicate with the Master Alarm Unit.

Panic button
On the top of every Wireless Detection Unit is a large red button that functions the same as the one on the Master Alarm Unit. Pressing the panic button will immediately activate the siren and transmit a wireless signal to the LaserShield® Master Alarm Unit and an alarm will be activated, notifying the 24/7 Rapid Response Monitoring Service.

Power connection
The Wireless Detection Unit requires a power connection only; there is no need for a phone line.

Bypass button
A bypass button and indicator light is located under the motion sensor on the front of the unit. This button enables the user to bypass a bedroom Wireless Detection Unit at night. A small amber light will flash indicating the unit is in bypass mode. The bypass button does not affect the function of the panic button.

Battery back up
The battery will provide up to 12 hours of back up power.

Placement of unit
Each LaserShield Wireless Detection Unit is equipped with a state-of-the-art passive infrared detection system. The unit's view of detection spans out from the front of the unit in a 110-degree pattern ranging over 35 feet. Delivering approximately 1100 square feet of detection. The Laser Shield motion sensors samples the ambient room temperature and will detect an intruder's body heat moving across its detection zones.

Pet Friendly
A unique Pet Shield instantly snaps into place on the front of the LaserShield® motion detector on the Wireless Detection Unit. The Pet Shield blocks portions of the motion sensor so your pet is less likely to trigger an alarm.

Remember before ordering, this is an add-on product to the base LaserShield Starter Kit.